Fujitsu Siemens Computers SPARC Enterprise M8000 User Manual
Page 137
Appendix A
Message Meaning and Handling
A-21
[Remedy] Please contact customer service.
Failed to remove CMP xx on board n
[Explanation] Internal error during DR operation.
[Remedy] Please contact customer service.
scf_fmem_cancel() failed rv=0x
[Explanation] Internal error during kernel migration.
[Remedy] Please contact customer service.
scf_fmem_start error
[Explanation] SCF fails to start the FMEM operation. It is possible that there is
HW error and there is no SCF path or the SP is down.
[Remedy] Please contact customer service.
scf_fmem_cancel error
[Explanation] DR detects some error in the copy rename process and informs SCF
to cancel the operation. However, SCF fails to cancel the operation.
[Remedy] Please contact customer service.
Unknown cpu implementation
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
dr_mem_ecache_scrub:address (0x%lx) not on page boundary
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
unexpected kcage_range_delete_post_mem_del return value
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
opl_fc_ops_free_handle: DMA seen!
[Explanation] A DMA resource was found in the resource list that is being freed
while the board is unprobed.
[Remedy] Please contact customer service.
opl_fc_ops_free: unknown resource type