FujiFilm 4500N User Manual

Page 97

Align the new water filter notch with the holder partition

and place the new water filter into position.

NOTE:

Rotate the water filter in both directions to make sure that it is

secured firmly. If the water filter moves, reinsert it, making

sure the notch and partition are correctly aligned.

Align the water filter cover with the holder and rotate

clockwise to secure it.

10.

Close the front upper door.

★

The water pump starts supplying the water coating

section with water.

IMPORTANT:

If the " " LED lamp on the transfer monitor comes on,

make sure that the water filter cover is secured firmly.

NOTE:

After replacing the water filter, it takes about two minutes before

printing is enabled.

5.3 Water Filter Replacement

Holder Partition

Water Filter Notch