FujiFilm 4500N - Manual (Page 112)

103
6
DONOR/RECEIVER J
AM CLEARING
PR
OCEDURES
1 . Open the front lower door, raise the thermal processing unit
release lever "J11", and slowly open the thermal processing
unit to the right.
CAUTION:
The thermal processing unit is hot. Do not touch the thermal
processing unit immediately after opening it.
2 . Open the right-hand side upper door.
3 . Close the font lower door and open the front upper door.
4 . Push up the "J8" guide and rotate the "J7" knob inside the
front upper door to remove the jammed receiver.
5 . Close the right-hand side upper door and close the thermal
processing unit.
6 . Close the front upper door.
6.6 Jamming at Locations "7 and 8"
Thermal
Processing
Unit
Front Lower
Door
"J11" lever
Right-hand Side Upper Door
"J7" knob
"J8" guide