FujiFilm 4500N - Manual (Page 67)

58
To set the alarm to sound when the specified remaining quantity of donor, receiver, or water filter is
reached, follow the procedure below.
4.10 Setting the Remaining Quantity of Consumables for Alarms
1 . Press the ONLINE key on the operation panel to switch the
machine to OFFLINE condition.
2 . When the machine is in OFFLINE mode, press the NEXT
key twice.
★ The message changes to "Configuration".
3 . Press the SEL key.
★ The message changes to "Size".
4 . Press the NEXT key seven times.
★ The message changes to "Precaution Setup".
■ To set the alarm for the remaining quantity of donor
5 . Press the SEL key.
★ The message changes to "Donor Alarm".
6 . Press + or – key to set the remaining quantity of donor.
★ If the remaining quantity of donor is equal or less than
the entered value, the D LED on the transfer monitor
blinks.
■ To set the alarm level for the remaining quantity of
receiver
7 . Press the NEXT key.
★ The message changes to "Paper Alarm".
8 . Press + or – key to set the alarm remaining quantity of
receiver.
★ If the remaining quantity of receiver is equal or less than
the entered value, the R LED on the transfer monitor
blinks.
Configuration
ESC
PREV
SEL
NEXT ON LINE
Precaution Setup
ESC
PREV
SEL
NEXT
Donor Alarm
[ ]
10 +
[ ]
–
ESC
PREV
SEL
NEXT
Paper Alarm
ESC
PREV
SEL
NEXT
[ ]
10 +
[ ]
–
Size
ESC
PREV
SEL
NEXT
[ ]
DP +
[ ]
–