beautypg.com

3 water filter replacement – FujiFilm 4500N User Manual

Page 95

background image

86

When water filter replacement is needed, the following message

appears.

The " " LED lamp on the transfer monitor comes on, the

message displays changes to "Warning Change Water

Filter", and the alarm sounds.

The " " LED lamp on the transfer monitor comes on and

the alarm sounds when 1000 A4 prints or the equivalent

have been made, when six months have elapsed, or when

the quartiry of remaining consumables is equal to or less

than the value set in the counter through the "Configuration

menu".

NOTE:

The machine can continue to printing even if the " " LED

lamp lights. However, if water is not supplied sufficiently

to the water coating section due to a clogged water filter,

the print quality may deteriorate or a donor/receiver jam

may occur.

It is recommended that spare water filters be always kept

on hand. Place an order for them with your dealer.

1

.

Open the front upper door.

2

.

Rotate the water filter cover counterclockwise and then

take it out.

5.3

Water Filter Replacement

Warning

Change Water Filter

Front Upper Door

Water Filter Cover