8 checking the remaining consumables – FujiFilm 4500N User Manual
Page 64
55
4
HO
W
T
O
USE
THE OPERA
TION P
ANEL
To check the remaining quantity of the donor and receiver and the processing capability available
with the currently loaded water, follow the procedure below.
NOTE:
The counters are reset when a replacement is detected. This menu appears only when "Counter" in
"Configuration" is enabled.
Note that the proper counters may not appear if a replacement is made with the power set to OFF (O) or during
printing.
4.8
Checking the Remaining Consumables
1
.
Press the ONLINE key on the operation panel to switch
the machine to OFFLINE condition.
2
.
When the machine is in OFFLINE mode, press the SEL
key.
★
The message changes to "Counter Display".
■
To check the remaining donor
3
.
Press the SEL key.
★
The message changes to "Donor".
4
.
Check the approximate quantity of remaining donor.
★
The remaining quantity is displayed.
■
To check the remaining quantity of the remaining
receiver
5
.
Press the NEXT key.
★
The message changes to "Paper".
6
.
Check the approximate quantity of remaining receiver.
★
The processing capability is displayed.
Counter
ESC
PREV
SEL
NEXT
[ ]
Enable +
[ ]
–
Doner
130sheets
ESC
PREV
SEL
NEXT
Paper
130sheets
ESC
PREV
SEL
NEXT