FujiFilm 4500N User Manual

Page 96

MAINTENABCE

Remove the old water filter.

NOTE:

The water filter consists of the water filter case and water filter

element.

When replacing only the water filter element, do Steps 4 to 6.

When replacing the entire case, skip Steps 4 to 6 and do Step

7 after Step 3.

Rotate the filter case cover counterclockwise to remove it.

Take out the old filter element.

NOTE:

Use caution because the water filter case may be filled with

water.

Align the new water filter notch with the holder partition and

place the new water filter into position.

NOTE:

Rotate the water filter in both directions to make sure that it is

secured firmly. If the water filter moves, reinsert it, making sure

the notch and partition are correctly aligned.

Rotate the water filter case cover clockwise to secure it.

NOTE:

Make sure that the water filter case cover is secured firmly.

Otherwise, water leakage may occur.

Make sure that the O-ring is mounted on the exit joint.

5.3 Water Filter Replacement

Water filter

Water filter element

O-ring