2 machine startup – FujiFilm 4500N User Manual
Page 34
25
3
OPERA
TING PR
OCDURES
3.2
Machine Startup
1
.
Turn the power switch to the ON (
) position.
★
The operating panel displays "Self Check" and the
machine starts the self-check.
NOTE:
The lower part of the message indicates the size of the donor
and the type of the receiver used. The donor size is indicated
as follows.
Indication
Size of donor used
LL
323 mm (Double Letter Wide,etc.)
L
305 mm (Double Letter and Letter)
M
262 mm (10 x 12 and 10 x 8)
S
135 mm (4R and 5R,etc.)
The example shown on the left is for Double Letter wide
standard thickness, glossy paper.
★
When the self-check is completed, the message changes
to "Data Ready" and the ONLINE indicator lamp comes
on.
NOTE:
The three-digit number to the right of the indicated message
shows the dpi* value currently set.
The example on the left shows a dpi value of 400.
* dpi: Resolution. "dpi" is the abbreviation of dots per inch.
SelfCheck
Data Ready400
LL/DP-W
GLOSSY
THICK
Power Switch
ON LINE
DATA