HP 8700 - Manual (Page 12)

● SmartFocus: Turn on to focus images for clearer, sharper detail.
–
On
– Off (default)
● Digital Flash: Turn on to improve photos with poor lighting and contrast.
–
On
– Off (default)
● Change the print quality
–
Normal
– Best (default)
Normal uses less ink than Best , and applies only to the current print job. The
setting then automatically resets to Best .
● Print a sample page: Select to print a sample page useful for checking the print
quality of the printer.
● Print a test page: Select to print a test page containing information about the
printer that can help in troubleshooting problems.
● Network settings
–
Display network IP address : Select to display the IP address of the printer.
– Print network settings page : Select to print a network configuration page
that you can use for troubleshooting network connections or for the initial
network setup.
– Reset network settings : Select to reset the network settings to the factory
defaults.
– Reset Bluetooth settings : Select to reset the Bluetooth settings to the
factory defaults.
● Clean the print cartridges: Select to clean the print cartridges. After the cleaning
finishes, the printer prints a test page. You have the option to clean the cartridges
again if the test page shows that they are still not clean.
● Calibrate the printer: Select to calibrate the printer.
● Select paper settings
–
Auto-detect (default): Lets the printer auto-detect paper type and width.
– Manually set : Lets the user manually select paper type and width.
● Select language: Select to indicate the language you want used on the printer
display.
● Reset all menu settings: Restores factory settings for all menu items except
Select language .
Chapter 1
8 HP Photosmart 8700 series