HONDA MK SG-2 - Manual (Page 7)

MK SG-2 Revision 11/01, Effective Date November 13, 2001 Page 7
SAFETY
SG-2 SPECIFIC WARNINGS:
ÿ Read Owners Manual
ÿ Wear Protective Gear for –
Head Lungs Ear Eye
PRODUCT SPECIFICATIONS:
The MK SG-2 is a versatile Scarifier. Operated and used according to this manual, the MK SG-2 will provide
years of dependable service.
General Description:
The MK-SG-2, is engineered with an 8" Cutting Drum and reliable 8 horsepower Honda engine. The SG-2
scarifier is designed with fine depth control allowing the operator to make depth adjustments in 1/16-inch
increments.
Motor and Weight Specifications:
Motor and Weight specifications for the MK SG-2 are listed in Table 2 below.
Motor Type 4-stroke, Overhead valve, single cylinder
Max Power Output 9 Hp
Max RPM 3600 RPM
Cutting Drum Speed 2300 RPM
Fuel Tank Capacity 1.59 Gallons (6.0 Liters)
Engine Oil Capacity 1.16 Quarts (1.1 Liters)
Weight 185 lbs.*
Table 2
Drum Capacity:
The MK SG-2 uses a 6-inch diameter 8-inch long cutting drum with 6 hardened steel shafts that will
accommodate the most common cutting discs.
Scarifier Usage:
The MK-SG-2 is designed to grind surfaces, remove old coatings, prepare surfaces before applying new
coatings, roughen surfaces, groove surfaces and slot surfaces.
Features:
•
Conveniently placed engine controls for ease of usage
• Engage/Disengage Lever allowing the operator to raise or lower the cutting drum without changing the
cutting depth setting
•
Ergonomically designed handlebar to reduce operator fatigue
•
Poly micro V-belt to ensure maximum power transfer from the engine to the cutting drum
* Without the Cutting Drum installed.