HONDA MK SG-2 - Manual (Page 43)

MK SG-2 Revision 11/01, Effective Date November 13, 2001 Page 43
MAINTENANCE AND TROUBLESHOOTING
(W)
Install the Cutting Drum into the
SG-2; (See Cutting Drum
Change-out, Section 6)
Hold Cutting
Drum
Install
Shaft
(S)
Tighten the V-belt Adjusting
Screw Lock Nut using a 9/16-
inch wrench
(T)
Tighten the Engine Mounting
Plate Bolts on both sides of the
SG-2 using a 9/16-inch wrench
(U)
Install the Belt Guard
Lock Nut Rotate clockwise
to tighten
Mounting Plate Bolts Belt Guard
(V)
Tighten the Belt
Guard Retaining Screws using
a 9/16-wrench
Retaining Screws