HONDA MK SG-2 - Manual (Page 29)

MK SG-2 Revision 11/01, Effective Date November 13, 2001 Page 29
MAINTENANCE AND TROUBLESHOOTING
8. Changing Oil:
Oil is a major factor affecting performance and service life. Use 4-stroke automotive detergent oil.
SAE 10W-30 is recommended for general use. Other viscosity oil shown in the chart below may be used
when the average temperature in your area is within the recommended range.
NOTES: 1. Drain used oil while the engine is warm.
2. Conform to Federal, State and Local laws, codes and ordinances relative to environmental
protection for oil disposal.
100ºF -20ºF 0ºF 20ºF 40ºF 60ºF 80ºF
10W-30
5W-30
30
-20ºC -10ºC 0ºC 10ºC 20ºC 30ºC 40ºC -30ºC
(F)
Fill the Oil Reservoir
(See Checking Oil Level for
filling instructions)
(C)
Place a catch basin below the
Oil Drain Line and remove the
Drain Cap using two 1/2 –inch
wrenches
(B)
Free the Oil Drain Line
Wrench
(D)
Drain Oil the engine oil (conform
to Federal, State and Local laws
for disposal)
Oil Drain Line Wrench
(E)
Using two 1/2 – inch wrenches,
install the Drain Cap onto the
Oil Drain Line
(Ensure the Cap is tight)
(A)
Lower the SG-2 to its lowest
position
Fill through
Reservoir fill hole Wrench
Wrench Drain Completely