HONDA MK SG-2 - Manual (Page 19)

MK SG-2 Revision 11/01, Effective Date November 13, 2001 Page 19
SETUP, STARTUP, ADJUSTMENT, OPERATION and SHUTDOWN
OPERATION:
1. Standard Operation:
The SG-2 is capable of performing several different operations simply by changing drum configuration. The
following steps describe how the SG-2 is operated in any configuration
NOTE: When turning the SG-2, lift the Rear Wheels off the ground, and pivot the SG-2 on the Front Wheels.
(E)
Locate the Vibration Lock
(D)
Adjust the height of the Cutting
Drum for the Job being
performed
(See Step 2, Page 21 for)
(C)
Place the Engage/Disengage
Lever in the “Lower” position
(H)
Push the SG-2 at a smooth,
even pace to perform the cut
(G)
Adjust the speed of the SG-2
using the Throttle, as desired
(F)
Lock the height of the drum
using the Vibration Lock
(A)
Start the SG-2 in accordance
with Engine Start, Step 1 of the
STARTUP section, Page, 18
Push
(I)
Place the Engage/Disengage
Lever in the “Lift” when the cut is
complete
(B)
Raise the Cutting Drum to the
highest position
Start the SG-2
Highest
Position
Rotate
clockwise
to raise
Direction of
movement
Rotate clockwise
to raise, counter-
clockwise to lower
Vibration
Lock
Rotate
clockwise
to lock
Throttle
Engage/
Disengage Lever
Direction of
movement
Engage/
Disengage Lever