HP xp7010/xp7030 - Manual (Page 54)

Installing Permanently 54
STAT ? Queries the projector's current state: 0=standby state (off),
1=on, 2=warm-up state, 3=cool-down state.
ALERT Not a request Notifies when a system alert condition occurs: 0=lamp life
warning, 1=lamp life reached, 2=lamp faulty, 3=lamp
problem, 4=internal temperature too high, 5=fan problem,
6=ambient temperature too high, 7=color wheel problem,
8=lamp cover open, 9=ballast faulty.
ALERT is sent only by the projector, and cannot be used in
requests.
Simulated key presses
Command Parameters Description
BACK None Simulates pressing the Exit Arrow key on keypad
ENTER None Simulates pressing the ENTER key on keypad
LEFT None Simulates pressing the Left Arrow key on keypad
RIGHT None Simulates pressing the Right Arrow key on keypad
UP None Simulates pressing the Up Arrow key on keypad
DOWN None Simulates pressing the Down Arrow key on keypad
Power and status functions (continued)
Command Parameters Description