HP xp7010/xp7030 - Manual (Page 35)

Using the on-screen menu 35
Setup menu
Setup menu
Keystone Corrects the slanted sides of the picture. This compensates for a projector
that is too high or low relative to the screen.
Reset keystone Resets the keystone correction to zero (no correction).
Volume Adjusts the loudness of the projector’s audio (certain models only).
Mute Temporarily turns off the projector’s audio (certain models only).
Projector position Adjusts the picture to match the orientation of the projector: upright or
upside-down, in front of or behind the screen. Inverts or reverses the image
accordingly.
Lamp saver Sets a lower power level for the lamp.
Language... Selects the language used by the on-screen menu.
Hide Hides the picture and mutes the sound.
Advanced setup... Adjusts additional setup settings.
Power timeout Sets the length of time the projector waits for an input signal before
automatically shutting down.
Clean edges Enlarges and clips video images to remove noise from picture edges.
Timeout for menu Sets how many seconds the on-screen menu waits for input before it closes.
Horizontal size Fine-tunes the width of the image for multi-projector setups.
Reset lamp hours For a new lamp, resets the hours of use.
Projector lock... Sets or cancels a secret button sequence that must be entered for the
projector to operate.
Reset all settings Restores all menu settings to factory default settings.