HP xp7010/xp7030 User Manual
Page 37
Using the on-screen menu
37
VGA settings...
Adjusts settings for a computer input.
Auto-sync
Resynchronizes the projector with the input. If a VGA input image looks
incorrect, press auto-sync to try correcting the image.
Frequency
Adjusts the timing of the projector relative to the computer.
Tracking
Adjusts the phase of the projector relative to the computer.
Vertical offset
Adjusts the picture up or down within the projection area.
Horizontal offset
Adjusts the picture left or right within the projection area.
Picture mode
Adjusts color and picture settings to one of several combinations designed
for different types of viewing situations. You can use a different picture
mode for each source or each viewing environment. You can also customize
each picture mode.
Customize picture mode... Changes settings associated with the current picture mode.
Picture enhancement
Refines the color, lightness, and other characteristics of the picture.
White intensity
Increases the brightness of white areas.
Color temperature
Shifts color toward red or blue.
Aspect ratio
Selects how the picture fits on the screen:
•
Best fit automatically fits the picture without stretching it.
•
1-to-1 shows each picture dot as one projected dot.
•
Reduced fits a standard-shape picture onto a widescreen projection
screen.
•
Full uses the entire projector resolution screen size, with stretching
permitted.
Reset this picture mode Restores the current picture mode to its default settings.
Picture menu (continued)