Arturia KeyStep 37 MIDI Keyboard Controller and Sequencer - Manual (Page 96)

9.8. Sequence window
Below the individual sequence tabs is the sequence window. Right below the tabs are two
virtual knobs and a pull-down menu. These are the per-sequence parameters.
The sequence window also has a note window with a piano-style keyboard along the left
side. To the right of this keyboard is a grid with horizontal rows for note placement that
correspond to the virtual keys. The vertical columns represent the steps within the sequence.
9.8.1. Navigation
9.8.1.1. Scroll
If you have a scroll wheel you can move the piano roll view up and down. Place the cursor
in the piano roll field first, not over the keyboard graphic.
If you hold the Shift key on your computer keyboard the piano roll will move sideways.
You can also click/drag the scroll bars at the edge and bottom of the window to reposition
the sequence view.
9.8.1.2. Zoom
To zoom in and out of the horizontal view, place the cursor in the piano roll field. Then press
Command (Mac) or Control (Windows) and use the scroll wheel to adjust the view.
To zoom in and out of the vertical view, place the cursor over the keyboard graphic first.
Then press Command (Mac) or Control (Windows) and use the scroll wheel to zoom in and
out.
Scroll bar locations
91 Arturia - User Manual KeyStep 37 - The MIDI Control Center