Device projects, The working project, Live editing – Arturia KeyStep 37 MIDI Keyboard Controller and Sequencer User Manual
Page 85: Drag and drop
9.3. Device Projects
9.3.1. The Working Project
When the MCC and KeyStep 37 are in sync, the Working Project is the internal memory of
the KeyStep 37. Edits made to sequences inside the MCC are made simultaneously to the
KeyStep 37.
When they are not in sync the Working Project functions as a sort of 'target' onto which
Templates or sequences can be dragged and then transmitted to the KeyStep 37 memory.
But edits made to sequences inside the MCC when not in sync do not edit the sequences
inside the KeyStep 37.
9.3.1.1. Live editing
After you click the Sync button the internal KeyStep 37 memory is shown inside the MCC
in the Seq Editor window. Any edits you make to these sequences will also be made in the
KeyStep 37. This is called 'live editing.'?
Live editing works in one direction: from the MCC to KeyStep 37. Changes made from the KeyStep 37
front panel are not detected by the MCC. Use the Recall From button to back them up to your computer
before selecting another Template.
Important:
When you make a change in the Seq Editor window an
asterisk (*) will appear next to the name of the selected Template. These changes are not automatically
saved, so you will need to use the Save or Save As..... buttons to preserve your new sequence data.
9.3.1.2. Drag and drop
It's possible to drag a single sequence or a Template from the Project Browser onto the
Working Project. When you do, the sequence(s) will be sent to the KeyStep 37 internal
memory. See
for information about this.
Arturia - User Manual KeyStep 37 - The MIDI Control Center
80