Clear last, Saving sequences – Arturia KeyStep 37 MIDI Keyboard Controller and Sequencer User Manual
Page 56

Each time you perform one of those three functions the sequence will grow longer by one
step.
Remember:
the CV/gate outputs will drive a single voice on a monophonic synthesizer. The MIDI
Control Center has a parameter that specifies which note will be favored when a chord exists in a
sequence step. See chapter 10 for details.
4.3.2. Clear Last
This feature allows you to remove the last step of a sequence. It works whether the
sequencer is playing or recording, and even works if the sequencer is not running at all.
To clear the last step of a sequence:
• Make sure the proper sequence is selected
• Hold the Shift button
• Press the Stop button (Clear Last)
If the sequencer is running during this process, the next time it loops around to the end of
the sequence the last step will have been removed.
The Clear Last function does not undo the last recording you made; it shortens the sequence by
removing the last step
4.4. Saving sequences
KeyStep 37 allows you to carry 8 sequences with you at all times. But you can store an
unlimited number of sequences using the MIDI Control Center. So be sure to back up your
hard work to your computer often.
And once the sequences are safely stored on your computer it is possible to hand-pick sets
of sequences that are aimed at particular audiences or sessions.
See
for more information about the MIDI Control Center.
51
Arturia - User Manual KeyStep 37 - Creating Sequences