beautypg.com

Sync input/output, Midi input/output, Sync source selector switches – Arturia KeyStep 37 MIDI Keyboard Controller and Sequencer User Manual

Page 21: Kensington lock port

background image

1.7.5. Sync input/output

These jacks allow KeyStep 37 to interface with pre-MIDI technology that was capable of

synchronization, such as early drum machines. See

section 6.2.1 [p.62]

for information about

the types of sync signals KeyStep 37 can send and receive.

1.7.6. MIDI input/output

Connect standard MIDI cables and KeyStep 37 can send MIDI data to external MIDI-

compatible devices. It will also send MIDI data to those devices from your computer.

In addition to MIDI note data from the keys, KeyStep 37 can send and receive MIDI sync.

It's also possible to configure some of KeyStep 37's controls to send specific MIDI data using

the MIDI Control Center.

1.7.7. Sync source selector switches

There are four synchronization options which are accessed on the rear panel. Use the small

slider switches as shown in the diagram to select the option you want.

The picture at right has both switches down. It corresponds to the Internal sync option.

For descriptions of the various sync settings see

Chapter 6 [p.61]

.

1.7.8. Kensington lock port

KeyStep 37 is highly portable, and it should be carried only where you want it to go. So we've

included a Kensington lock slot on the far right edge of the rear panel so you can secure it

to the surface of your choice.

Arturia - User Manual KeyStep 37 - Introduction and Overview

16