Hisense HAIO163 163" Full HD HDR All-in-One LED Commercial Display - Manual (Page 4)

Safeguards
Please read the following safeguards for your device and retain for future reference. Always follow all warnings
and instructions marked on the device.
1. A note about safety and operating instructions
Read and follow all safety and operating instructions, and retain them safely for future reference.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
9. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
Unplug the device from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners. Cleaners
can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.
4. Water and Moisture
Avoid dripping or splashing of liquids onto the product. Objects filled with liquids, such as vases, should not be
placed on the product.
5. Ventilation
Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the device and to
protect it from overheating. Do not cover the ventilation openings in the cabinet and never place the set in a
confined space such as built-in cabinet unless proper ventilation is provided. Leave a minimum 10cm gap all
around the unit.
6. Power Source
This device should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supplied to your home, consult your appliance dealer or local power company.
7. Power-Cord Protection
Power- supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plug, wall outlets, and the point where they exit from the
device. Main plug is used as the disconnect device, the disconnect device shall remain readily operable.
8. Lightning
For added protection for this device during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the
device due to lightning or power-line surge.
(a) When the power - supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the device.
(c) If the device has been exposed to rain or water.
(d) If the device does not operate normally by following the operating instructions. Adjust only that are covered by
the operating instructions as an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the device to its normal operation.
(e) If the device has been dropped or the cabinet has been damaged.
(f) When the device exhibits a distinct change in performance - this indicates a need for service.
10. Object and Liquid Entry
Never push objects of any kind into this device through openings as they may touch dangerous voltage points
or short-out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the device.
11.
Servicing
Do not attempt to service this device yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
12.
Damage Requiring Service
Unplug the device from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
III
LED All-In-One User Manual