Metric Halo Mobile I/O - Manual (Page 222)

Routing Examples
222
Figure 13.35: Routing to Firewire
In the example above, the eight analog inputs of the LIO-8 are routed to FW channels 1-8. Since we've used
the direct outputs after the inserts, You can record into Pro Tools with your DSP effects. If you use the direct
outs before the inserts, any DSP effects won't be recorded. This would allow you to record the “dry” signal,
but put effects like MIOStrip in for the performers' mix!
If you want to work with stereo inputs, simply create stereo channels instead of mono or use a combination of
both. You can also route busses from the MIO Mixer into Pro Tools via the Firewire channels.
In Pro Tools, open the “I/O” window in the “Setup” menu and go to the “Input” tab: