AltiGen MAXCS 7.5 Polycom Configuration Guide - Manual (Page 15)

Polycom Configuration Guide Page 15 of 24
Configure DND Synchronization
You can configure an extension to synchronize Do Not Disturb (DND) settings between a Polycom IP phone and a
MAXCS client.
1. In MAXCS Administrator, select PBX > Extension Configuration. Select the extension.
2. Switch to the Answering tab.
3. In the Do Not Disturb section, select Enable Do Not Disturb. Click Ok.
This setting will be sent to the Polycom phone when the phone reboots.
Configure BLF
The Busy Lamp field feature is designed for users who monitor and pick up calls to other extensions. You can
configure up to 4 BLF slots per phone.
To configure BLF for an extension,
1. In MAXCS Administrator, select PBX > Extension Configuration. Select the extension.
2. On the Monitor List tab, configure the extensions to monitor.
Figure 22: Example of a Polycom phone display showing BLF extensions on the left
Figure 21: Example of a Polycom phone display showing DND button