AltiGen MAXCS 7.5 Polycom Configuration Guide - Manual (Page 11)

Polycom Configuration Guide Page 11 of 24
7. For Platform CA1, enter http://[MAXCS Server IP Address]/altigen.crt and click the Install button to install
the AltiGen certificate (in our example, this is http://206.40.10.25/altigen.crt).
If the installation is successful, that row will be greyed out with the certificate information.
Figure 14: The certificate has been installed
8. Under Settings > Network > TLS, expand the section TLS Applications.
9. Check or clear the Common Name Validation fields (for Provisioning and SIP) for public IP address phones
based upon the following table.
If the certificate was assigned
to a public IP address
If the certificate was assigned
to private IP address
Public IP address phones Check both options Leave both options unchecked
Private IP address phones Leave both options unchecked
Check both or leave both
unchecked
Figure 13: The Polycom configuration tool TLS Certificate Configuration panel