Brother FAX 3750 - Manual (Page 86)

74
C H A P T E R N I N E
Remote Retrieval
You can call your fax machine from any fax machine using touch tone and
use a Remote Access Code and other button presses to retrieve fax
messages. Keep the included Remote Control Access Card in your wallet as
an aid.
Using Remote Access Code
1 Dial your fax number from a fax machine using touch tone.
2 When your fax machine answers and beeps, immediately enter your
Remote Access Code (1 5 9 ).
3 The fax machine signals the kinds of messages received:
1 long beep—Fax message(s)
No long beeps—No messages
4 The fax machine then prompts you with two short beeps to enter a
command. If you wait longer than 30 seconds to enter a command, the
fax machine hangs up. If you enter an invalid command, the fax
machine beeps three times.
5 Press 9 0 to reset the fax machine when you finish.
6 Hang up.
If your fax machine is set to Manual mode, you can access your machine by
waiting about 2 minutes, then entering the Remote Access Code within 30
seconds.
See
Changing
Remote
Access Code
p. 73