Brother FAX 3750 - Manual (Page 76)

64
C H A P T E R S E V E N
5 Use the dial pad to enter the name (up to 15 characters). You can use the
chart on page 29 to help you enter letters—OR—Go to Step 6 to store
the number without a name.
6 Press Set . The screen prompts you to select the type of number this is. Use
or to select the type you want.
FAX A fax only number
TEL A telephone (voice) number
FAX/TEL Both a fax and telephone (voice) number
7 Press Set .
8 Return to Step 2 to store another One-Touch number—OR—Press Stop to exit.
When you dial an AUTO DIAL number, the screen displays the name you’ve
stored, or, if you haven’t stored a name, the number you’ve stored.
If you need to store a longer pause than 3.5 seconds, press Redial/Pause two or
more times.
Even if you lose electrical power, numbers stored in memory will not be lost.
Storing Speed Dial Numbers
You can store Speed Dial numbers, so you can dial by pressing only three
keys. There are 100 Speed Dial locations. Even if you lose electrical power,
numbers stored in memory will not be lost.
1 Press Function , 6 , 2 .
The screen prompts you to enter a location.
SPEED-DIAL? #
2 Use the dial pad to enter a two-digit location (00–99).
3 Press Set . The screen displays your entry, then prompts you to enter the
number you’re storing.
#05:
ENTER & SET
4 Enter the number (up to 20 digits).
5 Press Set . The screen now prompts you to store a name with this number.
NAME:
See
Speed Dialing
p. 68
See
ALL DIAL
Report
p. 79