LumaSense Technologies INNOVA 1316A-2 - Manual (Page 39)

Chapter 3
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 39 of 97
Following picture will occur:
Figure 3.5. Creating a log file.
Change the file name and select the location where to save the file.
To switch ON/Off the data log use the setting on the
Main Window workspace.
When you stop a measurement, the current data file can be closed.
To close a log file pull down the file menu and select Close File:
Should you restart measurement in the same software session you
will be given the choice to append the new measurement data to the
file. To do so pull down the file menu and select Append to file.
The measured data is stored in a format that is easily transferred to,
and used by, spreadsheet programs like for instance Microsoft Excel.
The format of the data in the file is shown below.
Data separator: space
Text delimiter: none
Decimal separator: 0.00