LumaSense Technologies INNOVA 1316A-2 - Manual (Page 30)

Chapter 2
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 30 of 97
Fig.2.5 The BZ6013’s Main Menu Screen
2.6 Using the Software
This section explains the various parts of the screen and tells you
how to use the menu system to “drive” the software. Feel free to try
the various movement commands as you read through this text.
Note: If an incorrect COM port is set, not every screen will be
available to you.
2.6.1 Screen Layout
Nearly every screen presented in the BZ6013 software is based upon
the same screen design. The main exception to this is the
measurement screen. The Main Menu screen, see Fig.2.5 , is an
example of a “standard” screen.
2.6.2 Title Bar
Located at the top of the screen, this area gives the title of the
BZ6013 program.
2.6.3 Menu Bar
Located below the title bar, this area offers pull-down menus used
for choosing the different setups, measurement, calibration or
utilities.