LumaSense Technologies INNOVA 1316A-2 - Manual (Page 35)

Chapter 3
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11 1316A-2 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 35 of 97
Figure 3.1. BZ6013 Main Window showing real time measurement
results. Averaging None
Freon mode
Gives the possibility to select the reference for measurement of
Freon. It is possible to have the data presented as either FREON1 or
FREON2.
Averaging
None, Mean or Mean +STDEV
Using None the data will be displayed in real time without averaging
see figure 3.1.
Using Mean the number of samples selected in the Number of
samples field will be read out as Mean values in the upper part of
the Main Window and the real time results in the bottom part of the
window see figure 3.2