7 rfid reader, Rfid, Eader – IEI Integration ICECARE 7 User Manual

Page 64: Figure 4-22: rfid application

ICECARE-07 Mobile Field Assistant

Page 53

NOTE:

The flash mode is not available when using the front camera.

4.7 RFID Reader

There is a RFID reader on the top panel (Figure 1-6). To use the RFID reader, follow the

steps below.

Step 1:

Go to Settings > More…, and tap NFC to turn on the RFID function.

Step 2:

On the application page, tap NFC Demo to open the RFID application.

Figure 4-22: RFID Application

Step 3:

Use the RFID reader to read a RFID card, then the card number will be shown in

the TAG Information column (Figure 4-23).