3 battery pack installation, Attery, Nstallation – IEI Integration ICECARE 7 User Manual
Page 28: Figure 3-1: release the battery locks
ICECARE-07 Mobile Field Assistant
Page 17
Anti-static Discharge: If a user open the rear panel of the ICECARE-07, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
3.3 Battery Pack Installation
This section covers the installation of the battery packs.
Step 1:
Make sure the battery locks are in unlock position.
Figure 3-1: Release the Battery Locks
Step 2:
Install a battery pack as shown in
44
Figure 3-2
.