IEI Integration ECW-281B-N270-WT v2.10 User Manual
Page 69

ECW-281B-R21/N270 Embedded System
Page 53
Figure 4-11: Mounting the DIN RAIL
Step 4:
Secure the DIN rail to the mounting bracket by turning the top screw clockwise.
This draws the lower clamp up and secures the embedded system to the DIN
rail (
765H765H767H
Figure 4-12
).
Figure 4-12: Secure the Assembly to the DIN Rail
4.2.9 Wireless Antenna Installation (Wireless Models Only)
To install an antenna to the wireless ECW-281B/281B2-R21/N270 series for efficient
wireless network transmission, follow the steps below.
Step 1:
Locate the antenna connector on the rear panel of the embedded system (refer
to
766H766H768H
Figure 2-5
).
Step 2:
Install the antenna to the antenna connector (
767H767H769H
Figure 4-13
).
This manual is related to the following products: