IEI Integration ECW-281B-N270-WT v2.10 - Manual (Page 139)

ECW-281B-R21/N270 Embedded System
Page 123
Step 5: Insert the SO-DIMM . Push the SO-DIMM chip into the socket at an angle
(
841H841H843H
Figure 7-2 ).
Figure 7-2: SO-DIMM Installation
Step 6: Open the SO-DIMM socket arms . Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See
842H842H844H
Figure 7-2 )
Step 7: Secure the SO-DIMM . Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket. Step 0: