1 so-dimm replacement – IEI Integration ECW-281B-N270-WT v2.10 User Manual
Page 138
ECW-281B-R21/N270 Embedded System
Page 122
7.3.1 SO-DIMM Replacement
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the ECW-281B/281B2-R21/N270. Please make sure the purchased
SO-DIMM complies with the memory specifications of the
ECW-281B/281B2-R21/N270.
To replace a SO-DIMM memory module into a SO-DIMM socket, please follow the steps
below.
Step 1:
Remove the bottom surface panel.
Place the ECW-281B/281B2-R21/N270 on
an anti-static pad with the bottom panel facing up and the bottom surface
removed. (see Section
838H838H840H
4.2.3
).
Step 2:
Locate the SO-DIMM
(
839H839H841H
Figure 7-1
).
Figure 7-1: SO-DIMM Cover Plate
Step 3:
Remove the SO-DIMM
by releasing the arms on the SO-DIMM socket.
Step 4:
Align the new SO-DIMM with the socket
. The SO-DIMM must be oriented in
such a way that the notch in the middle of the SO-DIMM must be aligned with
the plastic bridge in the socket (
840H840H842H
Figure 7-2
).