IEI Integration ECW-281B-N270-WT v2.10 - Manual (Page 107)

ECW-281B-R21/N270 Embedded System
Page 91
Force BIOS D EFAULT
Allows the computer system to force a third party
BIOS to display during system boot.
Keep Current Allows the computer system to display the
information during system boot.
Bootup Num-Lock [Off]
The Bootup Num-Lock BIOS option allows the Number Lock setting to be modified
during boot up.
Off D EFAULT
Does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key
located on the upper left-hand corner of the 10-key pad. The
Number Lock LED on the keyboard lights up when the Number
Lock is engaged.
On
Allows the Number Lock on the keyboard to be enabled
automatically when the computer system boots up. This allows
the immediate use of the 10-key numeric keypad located on
the right side of the keyboard. To confirm this, the Number
Lock LED light on the keyboard is lit.
Boot From LAN Support [Disabled]
The BOOT From LAN Support option enables the system to be booted from a remote
system.
Disabled D EFAULT
Cannot be booted from a remote system through the
LAN
Enabled D EFAULT
Can be booted from a remote system through the
LAN
5.5.2 Boot Device Priority
Use the Boot Device Priority menu (
887H795H795H797H
BIOS Menu 16 ) to specify the boot sequence from
the available devices. The following options are available: