IEI Integration ECW-281B-N270-WT v2.10 - Manual (Page 61)

ECW-281B-R21/N270 Embedded System
Page 45
1 Driver and manual CD
1
Wireless antenna (wireless model only)
1 VESA MIS-D 100 wall mount kit
(optional)
1 DIN mount kit (optional)
Table 4-1: Package List Contents
4.2.3 Bottom Surface Removal
Before the jumper settings can be configured and the hard disk drive can be installed, the
bottom surface must be removed. To remove the bottom surface, please follow the steps
below:
Step 1: Remove the bottom surface retention screws. The bottom surface is secured to
the chassis with six retention screws (
750H750H752H
Figure 4-1 ). All six screws must be
removed.
Figure 4-1: Bottom Surface Retention Screws