IEI Integration ECW-281B-N270-WT v2.10 - Manual (Page 34)

ECW-281B-R21/N270 Embedded System
Page 18
3.1 Embedded System Motherboard
NOTE:
The jumpers and connectors shown in the section below are those jumpers
and connectors that are relevant to the configuration and installation of the
embedded system. For a complete list of jumpers and connectors on the
WAFER-945GSE motherboard, please refer to the WAFER-945GSE user
manual.
The ECW-281B/281B2-R21/N270 models have a WAFER-945GSE motherboard installed
in the system. The following sections describe the relevant connectors and jumpers on the
motherboard.
3.1.1 WAFER-945GSE Motherboard Overview
The locations of the WAFER-945GSE jumpers and connectors used on the
ECW-281B/281B2-R21/N270 are shown in
694H694H696H
Figure 3-1 below.
Figure 3-1: WAFER-945GSE Jumper and Connector Locations