B.1 one key recovery introduction – IEI Integration ECW-281B-N270-WT v2.10 User Manual
Page 146
ECW-281B-R21/N270 Embedded System
Page 130
B.1 One Key Recovery Introduction
The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup
and recovery tool. The one key recovery provides quick and easy shortcuts for creating a
backup and reverting to that backup or for reverting to the factory default settings.
The IEI One Key Recovery tool menu is shown below.
Figure B-1: IEI One Key Recovery Tool Menu
Prior to using the IEI One Key Recovery tool (as shown in
761H761H843H843H845H
Figure B-1
) to backup or
restore Windows system, five setup procedures are required.
1. Hardware and BIOS setup (see Section
762H762H844H844H846H
B.2.1
)
2. Create partitions (see Section
763H763H845H845H847H
B.2.2
)
3. Install operating system, drivers and system applications (see Section
764H764H846H846H848H
B.2.3
)
4. Build-up recovery partition (see Section
765H765H847H847H849H
B.2.4
)
5. Create factory default image (see Section
766H766H848H848H850H
B.2.5
)
After completing the five initial setup procedures as described above, users can access
the recovery tool by pressing <F3> while booting up the system. The detailed information
of each function is described in Section
767H767H849H849H851H
B.4
.
NOTE:
The initial setup procedures for Linux system are described in
Section
768H768H850H850H852H
B.3
.