HP Compaq nx5000 series - Manual (Page 62)

2–6 Maintenance and Service Guide
Troubleshooting
Device Options
■ Enable/disable the embedded numeric keypad
at startup.
■ Enable/disable multiple standard pointing
devices at startup. (To set the notebook to
support only a single, usually nonstandard,
pointing device at startup, select Disable).
■ Enable/disable USB legacy support for a
USB keyboard. (When USB legacy support
is enabled, the keyboard works even when
a Windows operating system is not loaded).
■ Set an optional external monitor or overhead
projector connected to a video card in a Port
Replicator as the primary device. (When the
notebook display is set as secondary, the
notebook must be shut down before it is
undocked from a Port Replicator).
■ Change the parallel port mode from Enhanced
Parallel Port (EPP, the default setting) to
standard, bi-directional EPP, or Enhanced
Capabilities Port (ECP).
■ Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■ Enable/disable all settings in the Intel
SpeedStep window. (When Disable is selected,
the notebook runs in Battery Optimized mode).
Table 2-4
Advanced Menu (Continued)
Select To Do This