Tools required and preliminary procedures – HP 744 User Manual

Page 43

2-3

Installing Accessories

Tools Required and Preliminary Procedures

Tools Required for Installation

All field replaceable parts can be accessed with these tools:

Static grounding wrist strap

No. 1 Pozidriv screwdriver

Small flat-tipped screwdriver

5mm (3/16-inch) nutdriver (RAM standoffs require this tool)

Preliminary Procedures

Perform the following steps before installing or removing accessories:

1 Exit application programs.

2 Shut down the operating system and power off the VMEVME chassis.

(See Chapter 5 for detailed instructions.)

3 Remove all cables connected to the board computer.

4 Set up a static-free place on which to work.