HP 744 User Manual
Page 138

A-22
The Boot Console Interface
Displaying and Setting the Monitor Type
If no keyboards are found the following message is displayed:
WARNING: No keyboard(s) found. Turn off system
power, check keyboard connection(s) and
repeat interactive console search.
To advance all graphics adapter monitors to the next resolution, press the
key one time and wait five seconds for all monitor types to change. Do not hold
down the
types to advance for each press of the
4 When the following message is displayed, press the
selection of the device as the console:
Press the
the CONSOLE.
This selection will timeout in 10 seconds if not confirmed.
NOTE:
The message is displayed for only ten seconds before console search is
resumed. Press
The following message is displayed on the selected display:
GRAPHICS(s) MONITOR INFORMATION
Slot Model Type Resolution Freq Class
---- ----------------- ---- ---------- ---- -----
0 INTERNAL_EG_1280 12 1280x1024 75Hz
Selected CONSOLE path is: GRAPHICS(s)
Selected KEYBOARD path is: PS2