HP 744 User Manual
Page 140
A-24
The Boot Console Interface
Displaying the Current Memory Configuration
The following listing is a sample memory configuration table when memory
modules are properly installed and configured:
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot
Size
Status
----------------
0
64MB
Configured
1
32MB
Configured
2
64MB
Configured
---------
TOTAL
160MB
If the power-on selftest detects a defective or damaged memory card, using
the memory command (from the Information Menu prompt) displays the
following information:
WARNING: One or more memory banks were not configured due
to errors in the following SIMM(s).
Physical Slot Error Type
------------- -----------
3 SIMM hardware error
Memory Card Stack
+-------------------------+
Slot 3 | Failed |
+-------------------------+
+-------------------------+
Slot 2 | 64MB OK |
+-------------------------+
+-------------------------+
Slot 1 | 32MB OK |
+-------------------------+
+-------------------------+
Slot 0 | 64MB OK |
+-------------------------+
==========================================================
Side view of Model 9000/744/165L Single Board Computer PCB.
SUGGESTION: If possible, turn off the computer and check to
see if the memory card(s) are seated properly.
Memory
HVERSION
SVERSION
---------------
---------------
0x0740
0x0900