HP 3500 - Manual (Page 45)

Menu item Values Description
ADJUST COLOR CYAN DENSITY
MAGENTA DENSITY
YELLOW DENSITY
BLACK DENSITY
RESTORE COLOR VALUES
Allows you to modify the half
tone settings for each color.
The default for each color is 0.
SET REGISTRATION PRINT TEST PAGE
Source
ADJUST TRAY 1
ADJUST TRAY 2
ADJUST TRAY 3
Allows 1-sided and 2-sided
image alignment. The default
for Source is TRAY 2. The
default for the sub-items
ADJUST TRAY 1, ADJUST
TRAY 2, and ADJUST TRAY 3
is 0.
AUTO SENSE MODE EXPANDED SENSING
TRANSPARENCY ONLY
If a tray is configured to PLAIN
or ANY SIZE, and the print job
does not specify the media
type, the printer will adjust the
print quality for the type of print
media it senses. The default is
EXPANDED SENSING, which
senses transparencies, glossy
paper, and tough paper.
INK TRANSPARENCY REJECT-GUARD FUSER
ACCEPT-NOT ADVISED
REJECT-GUARD FUSER
stops the print job when a non-
compatible transparency is
detected. This option protects
the printer fuser from damage.
ACCEPT-NOT ADVISED
allows the job to print normally
even though a non-compatible
transparency is being used.
The default value is REJECT-
GUARD FUSER.
FUSER MODES A list of available modes
appears. Allows you to associate each
paper type with a specific print
mode.
ENWW Configure device menu 33