HP 3500 - Manual (Page 151)

Control panel message Description Recommended action
ORDER FUSER KIT
alternates with
Ready
For help press
The fuser is near end of life. The printer
is ready and will continue for the
estimated number of pages indicated. Order the fuser kit. Printing can continue
until REPLACE FUSER KIT is shown.
or
Press for help.
See Supplies and accessories for more
information.
Order Supplies
alternates with
Ready
More than one supply item is low. 1. Press to identify which supplies
should be ordered.
2. Order the identified supplies.
Printing can continue until
REPLACE SUPPLIES is reached.
or
Press for help.
See Supplies and accessories for more
information.
ORDER TRANSFER KIT
alternates with
Ready
For help press
The number of pages remaining for the
transfer unit has reached the low
threshold, and the SUPPLIES LOW
setting in SYSTEM SETUP is set to
STOP. Order the transfer kit. Printing can
continue until REPLACE TRANSFER
KIT is reached.
Press for help.
See Supplies and accessories for more
information.
Paused
alternates with
To return to Ready
press the STOP key
The printer has paused. Press the S
TOP
key to resume printing.
Performing...
PAPER PATH TEST
The printer is performing a Paper Path
Test. No action necessary.
Performing
upgrade
A firmware upgrade is in process. No action necessary. Do not turn off the
printer.
please wait The printer is in the process of clearing
data. No action necessary.
Powersave on The printer is in the Powersave mode.
Any button press or the receipt of data
will clear PowerSave and execute the
action. No action necessary. The printer will
automatically exit Powersave.
Printing...
CONFIGURATION
The printer is generating the
configuration page. The printer will
return to the online Ready state when
the page is completed. No action
necessary. No action necessary.
ENWW Control panel messages 139