Print quality problems associated with paper jams, Print quality troubleshooting pages – HP 3500 User Manual
Page 206
●
The selected colors are undesirable when printed. Select different colors in the software
application or printer driver.
●
If you are using a reflective overhead projector, use a standard overhead projector
instead.
Print quality problems associated with the environment
If the printer is operating in excessively humid or dry conditions, verify that the printing
environment is within specifications. See the getting started guide for this printer for
information on operating environment specifications.
Print quality problems associated with paper jams
Make sure that all paper is cleared from the paper path. See
.
●
If the printer recently jammed, print two to three pages to clean the printer.
●
If the paper does not pass through the fuser, which causes image defects to appear on
subsequent documents, print two to three pages to clean the printer. However, if the
problem persists, see
Print quality troubleshooting pages
.
Print quality problems associated with toner buildup inside
the printer
Over time, toner and other particles can build up inside the printer. This buildup can cause
the following print quality problems:
●
marks at even intervals on the printed side of the page
●
toner that smears easily
●
toner specs on the page
●
vertical streaks or bands on the page
To correct these types of problems, clean the printer. See
.
Print quality troubleshooting pages
Use the built-in print quality troubleshooting pages to help diagnose and solve print quality
problems.
1. Press
M
ENU
to enter the MENUS.
2. Press
to highlight DIAGNOSTICS.
3. Press
to select DIAGNOSTICS.
4. Press
to highlight PQ TROUBLESHOOTING.
5. Press
to print the pages.
The printer returns to the Ready state after printing the print quality troubleshooting pages.
If print quality defects are found when you review the print quality troubleshooting pages,
perform a printer calibration. See
194
Chapter 8 Problemsolving
ENWW