HP 3500 - Manual (Page 155)

Control panel message Description Recommended action
REPLACE
CARTRIDGE
alternates with
To continue press .
The identified print cartridge is nearing
the end of its useful life and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP. To override,
press . 1. Order the identified print cartridge.
2. Press to continue.
or
Press for help.
See Supplies and accessories for more
information.
REPLACE FUSER KIT
For help press
The fuser kit is at end of life. Press for help.
or
See Replacing the fuser and pickup
roller for more information.
See Supplies and accessories for more
information.
REPLACE FUSER KIT
alternates with
To continue press
The fuser is near end of life and the
SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP. 1. Order the fuser kit.
2. Press to continue printing.
Printing can continue until
REPLACE FUSER KIT is reached.
or
Press for help.
See Supplies and accessories for more
information.
REPLACE SUPPLIES
alternates with
For status press
At least one supply item is out and
needs to be replaced and another
supply item is either out or low. 1. Press to identify which supplies
should be replaced.
2. Press for help.
or
See Replacing supplies and parts for
more information.
See Supplies and accessories for more
information.
REPLACE SUPPLIES
alternates with
To continue press
More than one supply item is low, and
the SUPPLIES LOW setting in SYSTEM
SETUP is set to STOP. 1. Press to identify which supplies
should be ordered.
2. Order the identified supplies.
3. Press to continue printing.
See Supplies and accessories for more
information.
REPLACE TRANSFER KIT
For help press
The transfer unit is at end of life. Press for help.
or
See Replacing the transfer kit for more
information.
See Supplies and accessories for more
information.
ENWW Control panel messages 143