beautypg.com

HP 3500 User Manual

Page 148

background image

Control panel message

Description

Recommended action

FLASH IS

WRITE PROTECTED

alternates with

Ready

To clear press

For the HP Color LaserJet 3700 series
printer only.

The file system is protected and no new
files can be written to it.

1.

To enable writing to the Flash
Memory, turn off write protection
using HP Web Jetadmin.

2.

To remove this message from the
display, turn the printer off and then
back on.

See

HP Web Jetadmin

for more

information.

Genuine HP

supplies installed

A new HP cartridge has been installed.
The printer returns to the Ready state
after approximately 10 seconds.

No action necessary.

GENUINE HP SUPPLIES

DESIGNED FOR

This genuine HP supply was not
designed for this printer and is not
supported. Print quality might be
affected.

Replace this supply with a genuine HP
supply designed for this printer.

Incorrect

Access to the menu is restricted.

Contact the network administrator.

INCORRECT

CARTRIDGE

alternates with

For help press

A color cartridge is installed in an
incorrect slot or the cartridge is the
wrong type, and the cover is closed.

Press

for help.

or

See

Changing print cartridges

for more

information.

Incorrect supplies

For status press

At least one supply item is incorrectly
positioned in the printer and another
supply item is missing, incorrectly
placed, out, or low.

Press

and then press

for help.

or

See

Replacing supplies and parts

for

more information.

Initializing

This message is displayed when the
printer is turned on, as soon as the
individual tasks begin initialization.

No action necessary.

Initializing

permanent storage

This message is displayed when the
printer is turned on to show that
permanent storage is being made ready
for use.

No action necessary.

INSTALL

CARTRIDGE

alternates with

For help press

The cartridge is either not installed or
not correctly installed in the printer.

Press

for help.

or

See

Changing print cartridges

for more

information.

INSTALL FUSER

For help press

The fuser is either not installed or not
correctly installed in the printer.

Press

for help.

or

See

Replacing the fuser and pickup

roller

for more information.

136

Chapter 8 Problemsolving

ENWW