HP 3500 - Manual (Page 154)

Control panel message Description Recommended action
Ready
Diagnostics mode
alternates with
To exit press
Cancel Job key
The printer is online and ready for data.
No status or device attendance
messages are pending at the display. No action necessary.
Ready The printer is online and ready for data.
No status or device attendance
messages are pending at the display. No action necessary.
Receiving
upgrade
A firmware upgrade is in progress. Do not turn the printer off until the
printer returns to Ready.
RELOAD TRAY X
TRNSPRNCY
alternates with
Verify transparency
meets specification
The transparency currently loaded might
not be supported.
CAUTION
Use only transparencies specified for
use with HP Color LaserJetprinters. Non-
compatible transparencies can damage
the printer. See the HP LaserJet Printer
Family Print Media Specification Guide.
1. Remove all non-compatible
transparencies from Tray X.
2. Load compatible transparencies in
Tray 1.
See Printing on special media for more
information.
REMOVE ALL
PRINT CARTRIDGES
alternates with
To exit press
Cancel Job key
The printer is executing a Component
Test. Remove all print cartridges.
After diagnostics are complete, reinstall
all print cartridges.
REMOVE AT LEAST ONE
PRINT CARTRIDGE
alternates with
To exit press
Cancel Job key
The printer is executing a Disable
Cartridge Check or Component Test. Remove one print cartridge.
After the test is complete, reinstall the
print cartridge.
REPLACE
CARTRIDGE
alternates with
For help press
The identified print cartridge has
reached the end of life. Printing will not
continue until the cartridge is replaced. Press for help.
or
See Changing print cartridges or
Replacing supplies and parts for more
information.
See Supplies and accessories for more
information.
142 Chapter 8 Problemsolving ENWW