HP 3500 User Manual
Page 147
Control panel message
Description
Recommended action
CLOSE FRONT DOOR
The front door needs to be closed.
Close the front door.
Creating...
CLEANING PAGE
The printer is generating a cleaning
page. The printer returns to the Ready
state when the cleaning page is finished
printing.
1.
Press
M
ENU
to enter the menus.
2.
Load the cleaning page into Tray 1.
3.
Select PROCESS CLEANING
PAGE.
DATA RECEIVED
alternates with
Ready
The printer received data and is waiting
for a form feed. When the printer
receives another file, the message
should disappear.
Press
to continue.
Event Log Empty
SHOW EVENT LOG was selected from
the control panel, and the event log is
empty.
No action necessary.
FLASH DEVICE
FAILURE
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
A device failure has occurred on the
specified storage device.
1.
Printing may continue for jobs that
do not require the Flash DIMM.
2.
To remove this message from the
display, press .
3.
If the message persists, remove
and re-install the Flash DIMM.
4.
If the message persists, replace the
Flash DIMM.
Flash disk X
initializing
alternates with
DO NOT POWER OFF
The new flash DIMM installed in slot X is
initializing.
For the HP Color LaserJet 3700 series
printer only.
No action necessary.
FLASH FILE
OPERATION FAILED
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to
download a file to a non-existent
directory).
1.
Printing may continue.
2.
To remove this message from the
display, press .
3.
If the message reappears, there
might be a problem with the
software application.
FLASH FILE
SYSTEM IS FULL
alternates with
Ready
To clear press
For the HP Color LaserJet 3700 series
printer only.
The printer received a PJL file system
command that attempted to store
something on the file system but was
unsuccessful because the file system is
full.
1.
Use HP Web Jetadmin software to
delete files from the Flash Memory
and try again.
2.
To remove this message from the
display, press .
See
for more
information.
ENWW
Control panel messages
135