HP 3500 - Manual (Page 162)

Control panel message Description Recommended action
53.10.03 CHECK RAM/ROM
MEMORY The firmware DIMM in slot 1 has an
error. For the HP Color LaserJet 3700 series
printer only.
1. Turn the printer off.
2. Verify that the firmware DIMM is
correctly seated.
3. Turn the printer on.
4. If the problem persists, replace the
firmware DIMM.
54.X PRINTER
ERROR
A printer command error has occurred. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP support.
55.X
PRINTER ERROR
alternates with
To continue
turn off then on
A printer command error has occurred. 1. Press to continue.
2. If the message persists, turn the
printer off and then back on.
3. If the message persists, contact
HP Support.
57.X
PRINTER ERROR
alternates with
To continue
turn off then on
A printer fan error has occurred. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP Support.
59.X
PRINTER ERROR
alternates with
To continue
turn off then on
A printer motor error has occurred. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP Support.
Note
This message might also appear if the
transfer unit is missing or incorrectly
installed. Ensure that the transfer unit is
correctly installed.
62 NO SYSTEM No system was found. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP Support.
64 PRINTER ERROR
For help press
alternates with
To continue
turn off then on
Scan buffer error. 1. Turn the printer off and then back
on.
2. If the message persists, contact
HP Support.
150 Chapter 8 Problemsolving ENWW